Hiya. It’s Friday and it’s time for a fun build. I hope you like the project to day. Everyone seemed to really like the washi tape box so I had to make a companion. Check it out.
Product List
Fabricate Friday – An Embellishment Box
2 Replies
Fabricate Friday – An Autumnal Box
Hi there and welcome. I hope you are headed into a relaxing weekend. Can you believe it’s fall already? It was just summer a minute ago. To celebrate the season I decided to make a treat box with that super fun scarecrow from the Cookie Cutter Christmas stamp set. I hope you like it. Thanks for hanging out with me.
Product List
Fabricate Friday – A Washi Tape Holder
Hi there. I hope you are having a good week. This project was created out of necessity. It seems as if I have too many washi tapes to use so I store them away in different places on my desk. I will admit that I have a washi hoarding problem so I need to address it and try to find a solution. The solution is to use them up!!!! So, I have decided to put them some where that has easy access on my desk but keep them all together like (and if the container could look pretty that would be nice too). Check out my solution…
Product List
The details:
Cardstock sizing 8 1/2 by 10 inches.
Scored on the long side at 2 and 8 inches. On the short side at 2, 4, 6, and 8 inches.
Patterned paper sizing: 1 3/4 by 5 3/4
Fabricate Friday – Peach Box
TGIF. I hope you are going into your weekend with a wonderful attitude and a whole lot of crafting energy. I am pleased to share with you a cute little box I made. Check it out.
Product List
The details:
Cardstock sizing for the bottom of the box: 6 1/2 by 10 1/2 inches.
Scoring on the long side at 2 1/2, 5, 7 1/2 and 10 inches. On the short side at 2 1/2.
Cardstock sizing for the lid of the box 8 by 8 inches and patterned paper is 7 1/2 by 7 1/2 inches stuck together. Using a shim (a sliver of cardstock) score at 2 3/4 on all 4 sides.
Fabricate Friday – A magnet box
Hi there. It’s Friday and that means another construction of a fun gift box. Today’s inspiration came to me from the package that I received in the mail. It housed my thin craft magnets that I use to close projects up with (being a non-ribbon or velcro person I had to figure out how to secure the flaps).
I hope you like the project and that you try it yourself sometime. Have a great day and enjoy the show.
Product List
The details:
Cardstock sizing 10 1/4 by 7 1/2 inches.
Scoring on the long side at 3/4, 4 3/4, 5 1/2 and 9 1/2 inches. On the short side at 3/4, 1 1/2, 6, and 6 3/4 inches.
Patterned Paper with mat: 4 1/4 by 3 3/4 (mat) and 4 1/8 by 3 5/8 (for paper).
Fabricate Friday – Bag/Box
Hello and welcome. Thank you for joining me again for another 3 D how to video. I am excited to share with you today this really nifty little bag box. It is built like a box, sturdy and can hold a lot but closes like a bag with a cute flap. Check it out.
Product List
The Details:
Cardstock sizing 11 by 8 1/2 inches.
Scored on the long side at 2, 5 1/4, 7 1/4 and 10 1/2 inches. Short side scored at 1 1/2 by 6 1/2 inches.
Patterned Paper sizing 6 3/4 by 3 inches.
Fabricate Friday – A summer basket
Hello friends.
I have a really sweet project to share with you today. I figure it could be used as table topers on your summer dining table, a craft fare packaging for berry soap or just a really cute way of presenting some summer goodies for your kids. Check it out.
Product List
The Details:
Cardstock sizing at 7 by 7 inches. Scored on all 4 sides at 2 inches.
Patterned paper: 4 pieces sized 2 3/4 by 1 3/4 inches. The handle is 8 1/2 by 3/4 inches of cardstock with 8 1/2 by 1/2 of patterned paper.
Fabricate Friday – Favor Pocket
I promised last week that I would have another Envelope Punch Board project for you and I certainly do. This one is super cute and tiny. I hope you like it too. 🙂
Product List
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Details:
Cardstock sizing 4 by 4 inches.
- At 2 1/4 punch and score and scoot to 2 1/2 and score only.
- Turn, line up the first score line that was made (about 1 3/4) punch and score and scoot to 2 and score only.
- Skip the next side.
- Line up at 1 3/4 punch score and scoot to 2.
- Round edges.
Patterned Paper sizing: 1 3/4 by 2 1/2 inches. (front)
1 3/4 by 3 inches (inside). Punch at 2 1/2 flip punch at 2 1/4 use un scored cardstock edge to cut triangle and then corner round ( or trace cut like I did in the video.
Fabricate Friday – Teeny Tiny Milk Carton Box
I hope you all are having a wonderful day so far. I have a cute project to share with you today. Check it out.
Product List
|
|
|
|
|
|
|
|
|
|
|
|
The Details:
Cardstock sizing: 4 1/4 by 3 1/2 inches.
Long side scoring at 1, 2, 3, and 4 inches and short side scoring at 1 2 1/2 and 3 1/4 inches.
Patterned Paper sizing: 4 pieces sized 3/4 by 1 1/4
Fabricate Friday – Gate Fold Top Box
Hello everyone. I hope you have your craft on this weekend. This is a super pretty and elegant project I have to share with you today. I hope you enjoy it.
Please note here…I have corrected the measurements and double checked them with a ruler and everything is accurate. Previously I had a brain fart and I had swapped some numbers (I believe I have told you that I am not great with fractions??? now you know it’s true). Anyway, perhaps my wording was in bad English as well so I tried to add notes to the details below. If you have any questions please reach out to me. I will try my best to try to figure it out in a short amount of time.
Thank you to Kathy a follower, who caught my mistakes. I appreciate the help. This box was a doozie.
Product List
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Details:
- Bottom Box Card stock sizing: 8 1/2 by 7 1/4 inches.
Scoring on the long side at 1 1/2 and 7 inches, and the short side at 1 1/2 and 5 3/4 inches. (or 1 1/2 on all 4 sides).
Bottom layer 4 1/4 by 5 5/8 inches. This piece is for looks and stability on the very bottom or underneath of the box to hide the tabs from the other cardstock…makes it pretty.
- Gate tops: 2 pieces of cardstock sized at : 7 3/8 by 5 3/8 inches.
Scoring on 3 sides only… the long side at 1 1/2 and 5 7/8 inches, the short side at 1 and 2 1/2 inches. Note: the one inch tab adheres to the bottom of the box and creates a hinge for the box.
Patterned Paper sizing & mats:
- On the very top: Mat – 2 3/8 by 3 5/8 inches. Whisper White card sized 2 1/2 by 3 3/4 inches.
- Long Sides: 2 pieces for mats sized at 1 1/4 by 4 1/8 inches. 2 pieces of DSP sized at 1 1/8 by 4 inches.
- Short Sides: 4 pieces for mats sized at 1 1/4 by 2 3/4 inches. 4 pieces of DSP sized at 1 1/8 by 2 5/8 inches.
- Tops: 2 pieces for mats sized at 4 1/8 by 2 3/4. 2 pieces of DSP sized at 4 by 2 5/8 inches. Note: When adhering the top mats/papers to the gate box tops…I pushed the mats to the very edge of the free side. Which means the that there was only 3 sides that have a border and the opening or the free edge does not show the box…it was flush. If you want borders on all four sides you will have to reduce your mat and patterned papers differently than I did.
Fabricate Friday – By the Shore Treat Bag
Hello and greetings my fine crafty friends. It’s Friday and I have another treat encasing project to share with you today. I hope you like it. Details are below. Have a great weekend.
Product List
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Details:
Cardstock sizing; 8 1/2 by 5 1/2 inches
Scoring on the long side at 2, 4, 6, and 8 inches and on the short side at 2 inches.
Patterned Paper sizing: 2 pieces at 1 3/4 by 3 1/4 inches.
Fabricate Friday – Mini Gift Drawer Box
Hello and thank you for stopping by. I hope you all are well and happy and are headed into the summer weekend with smiles on your faces. I have a very cute project to share with you today. Check it out.
Product List
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Details:
Cardstock sizing for drawer: 4 1/2 by 4 1/2.
Score at 1/2 and 1 inch on all 4 sides.
Out side Box cardstock sizing: 7 1/16 by 3 5/8 inches.
Score on the long side at 1, 1 1/2 4 and 4 1/2 inches.
Scone on the short side at 1/2 inch on both sides.
Patterned Paper sizing; 1 piece sized at 2 3/8 by 2 3/8 and 1 piece at 2 3/8 by 7/8.
Fabricate Friday – Faux Fry Box
Hello and welcome. I have another Envelope Punch Board project for you today. I think I will have another one for you next week as well. Love how simple they come together. I hope you like it. Check it out.
Product List
|
|
|
|
|
|
|
|
|
|
Directions:
Patterned Paper Sizing 6 by 6 inches.
- Punch and score at 2 5/8, turn, line up the score line, punch and score. Repeat one more time…punch and score then punch the last side but don’t score.
- Fold the score lines.
- Fold bottom up.
- Place back in the punch board with the bottom to the right.
- Score at 2 1/2 inches.
- Fold those 2 score lines burnishing crisply.
- Put the envelope together regularly.
- Gently manipulate the bottom of the box till flat.
- Fast fuse on the corners.
- Round the top.
Fabricate Friday – Hand Stamped DSP Treat Bag
Well hello my crafty friends. I hope you are headed into a wonderful crafty weekend. Today I have a lovely treat bag to share with you. Using a favorite stamp set and some imagination. I mention in the video that my “new catalog shipment” hadn’t arrived by the time I was filming but I did get it so now I am crafting like a mad woman…paper scraps flying from my corner and my kitties are looking at me very strangely. Lol. Any way, I hope you enjoy the project.
Product List
The details:
- Patterned Paper or Cardstock sized 9 1/2 by 5
- Scoring on the long side at 1/2, 2, 5 and 6 1/2 inches and the short side at 1 1/2 inches.
Fabricate Friday – Big Daddy Match Box
Hi everyone. Hope you will treat your father to a nice weekend full of Dad stuff. I have a project that may help you encase a small gift for him. Check it out
Product List
Details
Drawer cardstock 8 by 8 inches. Using the envelope punch board line up at 2 1/2 punch, score and scoot to 4 3/8. Turn and repeat 3 more times using the scores as your guide. Round corners. Fold the small corner down and place back in the envelope punch board lining up the 2nd score line on the left at 1 1/2 and punch.
Drawer insert sized at 2 7/8 by 4 3/8
Outer box sleeve sized 10 by 4 1/2 and scored on the long side at 2 1/2, 4, 7 1/8 and 8 5/8.
Bottom mat sized at 4 3/8 by 3 and the layering piece at 4 1/4 by 2 7/8.
Fabricate Friday – 3 by 3 Card Pocket
Hello and happy Friday to you. I hope you all are well and happily enjoying the first few days of summer! I love the warm weather and the social time of gathering around a barbecue or hanging out with friends at the beach or back yard. Today I’m sharing a unique holder for 3 by 3 cards and I was thinking what you would do with a 3 by 3 card and I came up with a few ideas that would fit in with summer time activities. A small note that could be given with a bottle of wine, or a perfectly sized card to put with flowers or tuck in a lunch bag. A handy set of cards that you could give to the neighbour as a thank you for watching the cats when you go away for the weekend. Enjoy the show my friends…
Product List
Details:
- Outer pocket cardstock 10 by 7 1/2 inches, scored on the long side at 2, 2 1/2, 6 and 6 1/2.
- Insert pockets card stock 2 1/2 by 5 1/2 inches scored on the long side at 1/2, 1, 4 1/2, and 5. Short side scored at 1/2 and 1 inches.
- Patterned Paper front: 7 1/4 by 3 1/4 inches, cut horizontally at 1 7/8
- Patterned paper inside pockets: 6 7/8 by 1 3/8 cut in half long ways.
- Inside card; 7 1/4 by 3 1/4
Fabricate Friday – Oriental Note Holder
Hello and welcome.
In Wednesdays video I mentioned a little bit about my planner. I thought if you really wanted to take a close look at how fun this planner is I would share this little video. The thing about the planner is that you get to customize it. As artistic and crafty people we really like this option. I am really not sure what I will decide to get for 2017 but I promise to share with you when I do. As mentioned in the past video I have a coupon code and if you click HERE you can get $10 off your very own (just be prepared to fill out a bit of info to get that coupon). Here the quick video.
Today I have a really cool spin on the stamp set timeless textures in the way that I am making use of colours and the flourish to create a oriental looking embossed cover for the project. Check it out.
Product List
The details:
Outer case: Cardstock sizing 5 1/4 by 9 1/9 scored on the long side at 4, 5 1/8 and 7 1/8.
Top Cardstock (the easel) 4 by 5 1/4 with a top layer at 5 1/8 and 3 7/8 and an embossed piece of card stock at 5 and 3 3/4.
Box: Cardstock sizing at 5 3/4 and 6 3/4 scored at 1 on all sides.
Fabricate Friday – Envelope Punch Board Box
Wow, this is the last few days of the Annual Catalog and the Spring Summer Catalog. I am very excited to use my new goodies and hopefully you have gotten all the items that were retiring so you can hoard use them at a later date. Lol. Today’s project is using the Envelope Punch board again. Check it out. 🙂
Product List
Details:
Card stock sizing 8 1/2 by 8 1/2 inches.
First punch and score is at 3 1/4 slide to the left and make your 2nd punch and score at 6 1/8 inches. Turn the paper and follow the score lines for the remaining 3 sides.
Solid Mat and patterned paper sizing:
- 2 pieces sized 2 5/8 by 3 7/8 inches and top layer is 2 1/2 by 3 3/4 inches.
- 2 pieces sized 1 3/4 by 3 7/8 inches with top layer being 1 5/8 by 3 3/4.
- 1 piece sized 2 5/8 by 1 3/4 inches with top layer being 2 1/2 by 1 5/8.
Fabricate Friday – MandM Mini Treat Box
Hello and greetings to my bloggy visitors. I hope you are headed to a great weekend. I have a very cute tiny treat box for you today. Check it out!
Product List
The details:
Cardstock sizing 5 1/2 by 3 inches
Long side scored at 1/2. 2 1/2. 3, and 5 inches. Short side scoring at 1/2 on both sides.
Patterned paper and window sheet sizing: 1 7/8 by 1 7/8.
Fabricate Friday – Trinket Box
Hey there, hope you all are well. Today I have a cute trinket box to share with you. I hope you like it. Check it out.
Product List
The details:
Card stock sized 9 by 6 1/2 inches
Long side scored at 1 and 8 inches, short side scored at 1, 3. 4. and 6 inches.
Patterned Paper 6 3/4 by 1 3/4.
Fabricate Friday – Two piece Snack Cracker Box
Well hi there. Hope you are doing well. Love that you are hanging with me. This is a long video so I hope you don’t mind hanging out with me for a little longer than usual. Today I am sharing a box that was inspired by a box of crackers that I enjoyed recently (well, mildly enjoyed, the crackers weren’t that great). Inspiration comes from everywhere. With no further adieu I shall get on with it. 🙂
Product List
The Details.
Inside box: 2 pieces card stock measured 7 7/8 by 4 3/8 inches.
- Scored at the long side at 1/2, and 5 1/2 inches and the short side scored at 2.
Patterned paper:
- 2 pc 2 1/8 by 4 3/4 inches.
- 2 pc 2 1/8 by 2 1/8 inches.
Outside box: 1 piece card stock sized 11 1/8 by 10 3/4.
- Scored at the long side at 1/2, 3, 8 1/8 and 10 5/8.
- Short side scored at 2 1/2, 5, 7 1/2 and 10 inches.
Patterned paper sizing;
- 4 pc sided at 4 7/8 by 2 1/4 inches ,
- 2 pc 2 1/4 by 2 1/4.
Fabricate Friday – Open Top Envelope Punch Board Box
Hello and how are you? It’s Friday and I have an Envelope Punch Board Box for you today. Cute little thing it is. Could be filled with many treats and large enough to hold a variety of items. Check it out.
Product List
The details:
Cardstock: 8 by 8 inches
- First punch at 2, score, then slide left and punch and score at 5 1/2 inches. Repeat and follow previous scored lines. Round corner, use a pin wheel cut, cut 1 inch off all tabs.
Patterned paper sizing:
- 2 pieces at 2 5/8 by 2 1/4
- 2 pieces at 2 1/4 by 2
Fabricate Friday – Cutie Treat Box
Hey there, how are my favorite crafty people out there? I know this is a really exciting time right now, with the big retirement sale going on of a lot of Stampin’ Up!’s stamping supplies. If you haven’t a clue about what I am talking about you may want to visit the link at the top of this blog to my store to see all the tools, stamp sets and embellishments that are reduced in price and while supplies last. Every year, Stampin’ Up! publishes a new catalog and before that they put quite a few items on “the retirement” list and will no longer be producing these items. Therefore they go on sale and some are half price. Typically, papers, inks and embellishments go quickly. There are a lot of tools going out too. Although I am sad seeing 40% of my stamp sets and 60% of my tools on the list, I am looking forward to ordering out of the new catalog (obviously to replenish stock so I can feature and spotlight current items for you to craft with. I got a chance to look at the new catalog this week and there is some really nice things coming out. Very exciting!!! As a demonstrator I do get the opportunity to take part in a pre-order and I already have a list. Such fun. Anyway, onto today’s cute project. It’s a really cute box with enough size in it to hold a number of goodies. Please note here that the scalloped oval punch, the oval punch and the birthday bouquet patterned paper and enamel dots are on the retired list. If you want them, get them now and I think they will be quick to sell out. Also, the big craft scissors I use in the video are retiring too :(.
Product List
The particulars:
- Card stock sizing 12 by 6
Scoring on the long side at 2, 5, 7 and 10 inches. Scoring on the short side is at 2 and 4 inches.
Patterned paper sizing:
- Top and sides (3 pieces) 1 7/8 by 2 7/8
- Front (1 pc) 1 7/8 by 1 7/8 inches
Fabricate Friday – Small treat box (from half sheet of card stock).
Hello and welcome my fine crafty friends. I have a wee box for you today and I hope you like it. With no further adieu here is the project that I am sharing today. The particulars are below the video and supply list. Enjoy and have a good weekend.
The details:
- Card stock sizing: 7 1/2 by 5 1/2 inches
- Long side scoring at 1, 2 1/2, 4 1/4 and 5 3/4 inches.
Short size scoring at 1 1/2 and 4.
Patterned paper sizing:
- 2 pieces at 2 3/8 by 1 3/8 inches.
- 1 piece at 2 3/8 by 7/8
Fabricate Friday – Mossy Birthday Gift Box
Weird title eh? I have so many box making videos that I have to try to identify them any way I can. I am NOT a writer and my titles are not very original but I am sure you will forgive me because this is a really cute gift box and it just so happens that it is the project I am sharing today. I hope you enjoy the video and have a good weekend. The details are after the video and supply list. Enjoy.
Product List
The details:
Card stock sizing 8 1/2 by 11 inches
- Long side scored at 2 1/2, 5 1/4 7 3/4 and 10 1/2.
- Short side scored at 1 1/2, 5 1/4, and 7 3/4.
Patterned paper sizing:
- 2 pieces 2 1/2 by 3 1/2 inches (front & back)
- 2 pieces at 2 1/4 by 3 1/2 (sides)
- 1 piece at 2 1/4 by 2 1/2 (top)
SuNN Stampin' 